Floor Sealer

Price range: R95.00 through R1,985.00

Suitable for the following floor surfaces:

Wooden Floor surfaces
Tile surfaces except for porcelain tiles.
Vinal floors-Prevents damage to vinal floors where high traffic is present, example school corridors.
Marley tiles, Cement or concrete surfaces
Slasto (natural stone surfaces).
3 coats last +- for 6 months before stripping is required.

Description

DIRECTIONS:

Apply 3 coats of sealer to properly seal a floor. Ensure floor surface has been stripped and cleaned to remove previously applied waxes/products.
Best application method is with a spray bottle. Apply with a sheep skin applicator in straight lines. A clean spaghetti mop may also be used as an applicator but may lead to “lines” or foam bubbles forming on surfaces.
Ensure the applicator is clean to avoid any dirt/dust getting trapped on the surface, this will give the floor a dull effect.
After each coat, allow for 5-10 minutes of drying time before the next coat is applied.
After application, rinse the applicator with water to remove any sealer present, failure to rinse will cause the applicator to get hard and difficult to use for future applications.